Electropermanent Circular Magnetic Chuck type EPERU
print
REF 11.17
  • 11-12-et-11-17-35741
  • logo-large-35699

Electropermanent Circular Magnetic Chuck type EPERU

    • High holding power
    • Heavy duty construction

. Electropermanent circular chuck with parallel poles
. For ring-shaped workpieces (including thin rings)
. Suitable for simultaneous machining of several workpieces
. The smallest workpiece thickness: 4 mm
. Corresponding Control Unit and the Remote Control to be ordered separately:
See 50.03.BUP.230/400 and 50.10.T10
Included with purchase:
- Electric connection at the rear of the chuck
- With slip ring assembly either integrated into the chuck or separate (to be fitted to the machine spindle)
  • Use :
    • Grinding
    • Turning
  • Nominal force :
    • 100 N/cm²
  • Pole pitch :
    • 5 mm
    • 1 mm of brass
    • 4 mm of steel
  • Admissible wear of top plate :
    • 8 mm
  • Magnetic field height :
    • 5 mm
  • Voltage :
    • 340 VDC
Options :
- Other sizes and voltages on request
- Through hole in the middle
- Through holes to fit the chuck on the machine table
- Fitting adaptors to:
. Morse cone 3 or 4
. Short taper flanges for:
 A2 DIN 55026
 Bayonet DIN 55027
 Camlock DIN 55029
11-17-800px-36339

Qty Product Weight in kg A B C D E F G H I
11.17.5.150.34010,51509014--1203xM104-
11.17.5.200.34020,02009614--1404xM104-
11.17.5.300.34049,530010616--1904xM124-
11.17.5.400.34088,040010616--2506xM125-
11.17.5.500.340150,550011616--3206xM125-
11.17.5.600.340216,060011620--3906xM125-
11.17.5.700.340295,070011620--4506xM125-
11.17.5.800.340385,080011620--5006xM125-
11.17.5.1000.340673,0100013020--6008xM125-
indication_tableau_dessus
To request a quote
  • Enter quantities in the table above
  • Fill in the contact form below
Fields with an asterisk * must not be left blank
Details
Applications
Main Application *
I am a *
According to Law no. 78-17, dated January 6th 1978 of the French personal data act (CNIL), concerning information technology, files and personal liberty (article 36), the holder of the right of access may demand that any information that is inexact, missing or out-of-date information or whose collection, use, communication or storage is forbidden concerning him/herself be rectified, completed, clarified, updated or deleted. To exercise this right, please use the above form.
indication_tableau_dessous