Permanent U shape alnico magnet type AA 03
REF 83.03
Permanent U shape alnico magnet type AA 03
-
- Alnico magnet
-
- Alnico magnet
Aluminum nIckel cobalt magnets are castings that offer a good mechanical resistance as well as an elevated induction in closed circuit.
The strength is highest when the magnet is in contact with a mild steel, that is clean and thick enough. The strength is reduced when in contact with alloy steels (cast Iron -30%), due to air-gap or a high temperature (-0.02% per degree °C). ALNICO magnets are machinable, they can be cut on request and mounting is done with glue. U shaped magnets with one North pole side and one South pole side.
The strength is highest when the magnet is in contact with a mild steel, that is clean and thick enough. The strength is reduced when in contact with alloy steels (cast Iron -30%), due to air-gap or a high temperature (-0.02% per degree °C). ALNICO magnets are machinable, they can be cut on request and mounting is done with glue. U shaped magnets with one North pole side and one South pole side.
-
Use :
- Mounting
- Lock
- Clamping
-
Max. temperature of use :
- 180/450 °C
-
Density :
- 7.3 gr/cm³
| Qty | Product | Weight in kg | A | B | C | D | E | F | G | H |
|---|---|---|---|---|---|---|---|---|---|---|
| 83.03.22,2 | 0.018 | 22,2 | 7,9 | 11,3 | 6,35 | 3,3 | Force = 13N | |||
| 83.03.22 | 0.064 | 22 | 25 | 17 | 8 | 9 | 7 | Force = 30N | ||
| 83.03.30 | 0.070 | 30 | 20 | 20 | 15 | 11 | 5 | Force = 45N | ||
| 83.03.39 | 0.140 | 39 | 25 | 25 | 19 | 14 | 4,7 | Force = 90N | ||
| 83.03.45 | 0.209 | 45 | 30 | 30 | 22 | 17 | 5,2 | Force = 120N | ||
| 83.03.57 | 0.498 | 57 | 44,5 | 35 | 27,8 | 35 | 23 | 8 | Force = 180N | |
| 83.03.60 | 0.819 | 60 | 61,5 | 39,2 | 32 | 26 | 7 | Force = 250N | ||
| 83.03.70 | 0.906 | 70 | 57 | 41 | 35 | 41 | 25 | 8 | Force = 320N | |
| 83.03.79,6 | 1.570 | 79,6 | 82 | 54 | 38,5 | 47,6 | 36 | 9,5 | Force = 470N |
indication_tableau_dessus
indication_tableau_dessous