Permanent cylindrical multi polar ferrite magnet type AF01. MP

Ferrite magnet

Isotropic or anisotropic ferrite magnets are rust resistant ceramics and have a dark brown color, obtained through a metallurgic procedure of pressing and sintering powders. Ferrite is a hard material but sensitive to shocks and its strength is highest when the magnet is in contact with a mild steel, that is clean and thick enough. The strength is reduced when in contact with Alloy steels (cast Iron -30%), due to air-gap or a high temperature (-0.4% per degree starting at 20°C). Ferrite magnets are not machinable, they can not be cut or drilled. The mounting is done with glue. Magnetized multipolar 1 face.

Use :
- ILS
- Relay
- Sensor
- Lock

Max. temperature of use :
- 200 °C
Density :
- 4.8 gr/cm³
Resistance in compression :
- 500 N/mm²
Max. surface induction :
- 1500 G

Options :

All dimensions available on request.

Product	Weight in kg	A	B	C
80.01MP-8x5	0.0014	8	5	0.6N
80.01MP-12x4	0.002	12	4	1N
80.01MP-14x5	0.0035	14	5	1.3N
80.01MP-20x5	0.007	20	5	4N
80.01MP-25x5	0.011	25	5	5N
80.01MP-30x5	0.017	30	5	8N
80.01MP-8x4	-	8	4	-
80.01MP-10x4	-	10	4	-
80.01MP-14x3	-	14	3	-
80.01MP-15x6	-	15	6	-
80.01MP-20x3	-	20	3	-
80.01MP-25x3	-	25	3	-
80.01MP-30x3	-	30	3	-

indication_tableau_dessus

indication_tableau_dessous